Shop Outdoor Bench Cushions

This filling is recommended for outdoor applications and may also be used indoors. CumuPlush is a special layered blend of dry conjugate fiber and densified polyfiber designed to not retain water and resist mildew. Batting is added to the top and bottom of the CumuPlush to give the cushion an elegant, rounded look. *Thickness measurements are taken seam to seam. The loft on each side of your cushion could be up to 1 inch greater than your specified thickness. More Info

Optimal Comfort fill consists of a foam inner core with a layer of gel memory foam on top and bottom, fully wrapped in batting, enclosed in a liner with zipper. *Please note that we recommend Optimal Comfort for indoor or COVERED OUTDOOR USAGE only and not areas that will be rained on heavily. Thickness measurements are taken seam to seam. The loft on each side of your cushion could be up to 1 inch greater than your specified thickness. More Info

Measure the width of the cushion at the widest point as the left to right measurement when standing in front of the furniture where the cushion will be placed. We accept whole, half, and quarter-inch (.25 or .75) increments only. (Cushions more than 52" wide may show one or more visible seams in the cushion fabric when choosing a vertically directional fabric.) A zipper will be placed along the width of the cushion.

Measure the depth of the cushion at the deepest point as the front to back measurement when standing in front of the furniture where the cushion will be placed. We accept whole, half, and quarter-inch (.25 or .75) increments only.

Thickness is a matter of personal taste, but there are a few things to consider:
- Our most popular thickness is 3 inches.
- As a general rule, the thicker the cushion, the longer the cushion will provide comfortable support.
- Some fill types are not available for all thicknesses.

Directional fabrics will run from front to back (top to bottom)

Directional fabrics will run from side to side (left to right)

Cushion will not have any welting (cording/piping) along the seams.

Cushion will have double welting (cording/piping) along the seams. All welting is cut on the bias, giving it an angled appearance.

Cushion will have a seam around the top and bottom edges and is available in a broader range of thicknesses.

All 4 corners are squared.

The front 2 corners are squared, and the back 2 corners are rounded. All rounded corners have a radius of 4 inches. If you require a different radius, a template will be required. More Info

The back 2 corners are squared, and the front 2 corners are rounded. All rounded corners have a radius of 4 inches. If you require a different radius, a template will be required. More Info

All 4 corners are rounded. All rounded corners have a radius of 4 inches. If you require a different radius, a template will be required. More Info

No Ties

Ties on 2 Back Corners (Ties are sewn into the back seam of the cushion. Each fabric tie is 12 to 14 inches in length.)

Ties on 4 Corners (Ties are sewn into the seam of each cushion corner. Each fabric tie is 12 to 14 inches in length.)

Ties on Each Side (Ties are sewn into the side seams of the cushion. Each fabric tie is 12 to 14 inches in length.)